KNKNotes
Setup
Connect to a serial port. Do not use USB-to-Serial.
In Device manager, adjust the settings for the port to:
9600 baud
1 Stop Bit
No Parity
Xon/Xoff Flow Control
1 Stop Bit
No Parity
Xon/Xoff Flow Control
Click the Advanced button and set the flow control and transmit buffer sliders down to 1.
In KNK Studio:
Use the same settings for the port as in Device Manager.
Overcut 25
Trailing blade 5
Trailing blade 5
For larger areas, set overcut to 55-70.
Do not cut faster than 150m/s
Green translucent backing stock: 160 pressure for fold 400+ for cutting
white card stock: 130 for folds 260 for cuts